Fiberglass Mesh for Grinding Wheel is cut from reinforcing fiberglass cloth, which was coated with phenolic resin and then was baked. Since outer circle and inner hole are punched with one-step molding technology, the mesh pieces are same in size, equal in concentricity, and bright in appearance.
Characteristics
1. High chemical resistance.
2. Good dimensional stability,, excellent heat resistant,
3 .High strength and light weight,
4. High-speed cutting performance.
5. Great structural strength and deflection resistance.
Main specifications
Weight for cloth: 150-560 g/sqm
Mesh size: 5*5, 6*6, 8*8, 11*11 etc
Weave: Leno or Plain
Package: Every two pieces of nets can put wax paper or plastic film between them, and each pieces of net can put black paper together when packing into poly bag.
Other sizes can also be supplied according to customers' requirements.
Technical Data
Outer diameter: 70-500 mm
Inner diameter: 10-36 mm
Item No. |
Weight
(g/m2) |
Density (ends/inch2) |
Yarn (Tex) |
Breaking strength(N/50mm) |
Resin content
(%) |
Volatile Content
(%) |
Insoluble substance
(%) |
|
|
Warp |
Weft |
Warp |
Weft |
Warp |
Weft |
|
|
|
TM60L |
60 |
10*2 |
10 |
44 |
66 |
≥700 |
≥500 |
≥25 |
≤10 |
≤10 |
TM80L |
80 |
13*2 |
13 |
44 |
66 |
≥900 |
≥720 |
≥25 |
≤10 |
≤10 |
TM110L |
110 |
10*2 |
10 |
68 |
136 |
≥1000 |
≥1000 |
≥25 |
≤10 |
≤10 |
TM125L |
125 |
8*2 |
8 |
99 |
198 |
≥1000 |
≥1000 |
≥25 |
≤10 |
≤10 |
TM160L |
160 |
5*2 |
5 |
198 |
396 |
≥1300 |
≥1300 |
≥25 |
≤10 |
≤10 |
TM190L |
190 |
6*2 |
6 |
198 |
396 |
≥1500 |
≥1500 |
≥25 |
≤10 |
≤10 |
The wall reinforcement fiberglass mesh is used for:
1. Reinforcing walls - due to the elevated tensile strength both longitudinal and transversal it distributes the efforts made by impacts and pressure to the external walls;
2. Reinforcing the plaster layers - both interior and exterior ones, the thin wool and the polystyrene layers used for insulation;
3. Reinforcing self-leveling screeds;
4. Underlay systems.
Delivery Time:Shipped in 20 days after payment